Change or rekey · Clarington
Smart Lock Installation
Arthritis has made the small house key hard to grip and turn, especially with gloves on in January. Pressing a few buttons, or tapping a fob against the lock, would make coming home in winter far easier.
Smart Lock Installation
In plain words
Most of the skill in fitting a smart lock goes into the door rather than the electronics. Motors are patient but not strong, so a bolt that has to be shouldered home will stall, chew through batteries and eventually refuse. The locksmith checks that the bolt slides fully into the strike with the door closed and no hand on it, and corrects hinges, strike pocket or weatherstrip until it does. The bore holes are measured against the new lock's needs, the door's thickness is confirmed, and a reinforced strike goes in with long screws. Only then is the lock mounted, calibrated and programmed.
How the visit goesThe rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made. A lock with codes you can set and erase from your phone would end that cycle.
Clarington
How the visit goes
What the household wants the lock to do
Before a model is chosen, the locksmith asks how the door will actually be used. Who needs to get in, and how often does that list change? Should the door lock itself after a set time, or stay as it is left? Is a message when it opens useful or annoying? Does anyone want to open it from a phone while away, which brings the network into play, or is a keypad at the door enough? Are there children, a caregiver, a cleaner or a dog walker who need their own codes? Those answers decide between a simple keypad deadbolt, a Bluetooth model, a Wi-Fi model or a lock that joins an existing home hub.
Fitting the bolt, the body and the strike
With the door ready, the mechanical parts go in first. The new bolt is set to the door's backset and slid into the edge bore with its face plate flush. The outside assembly, keypad or touch surface, is placed with its cable fed through the cross bore, and the inside mounting plate is fixed so the two halves clamp the door without twisting. Screws are driven by hand rather than with an impact driver, because an over-tightened housing binds the motor. The interior unit is seated on the plate and the tailpiece aligned so the thumb-turn and the motor share the same travel. A reinforced strike with long screws replaces the light original.
A door that locks with a tap and still takes a key
You come away with a front door that responds to a code, a phone or a fob, and, on a keyed model, still accepts a conventional key in the rekeyed override. The bolt slides home without a shoulder on the door because the alignment was corrected before the lock went on, and the reinforced strike holds it. Everything has been tested with the door closed: each code, the app from inside and outside the house, the auto-lock delay and, where the model has one, the key. The finish matches the rest of the hardware, the packaging and manual are left with you, and the old lock is either handed over or taken away as you prefer.
Smart Lock Installation
In the van
- Reinforced box strike with long screws
- Adjustable-backset bolt and faceplate
- Hinge shims and long hinge screws
- Wi-Fi bridge or home hub
- Door-position sensor magnet
What affects the quote
Same fees day, night or weekend
1Removing an old mortise or non-standard lock
Older doors sometimes carry a mortise case or a lock with an unusual footprint. Filling the pocket, plugging holes and re-drilling to the standard preparation is careful joinery, and it is quoted as preparation.
2Rekeying the override cylinder and other locks
Repinning the smart lock's backup cylinder to a new key, cutting the keys and bringing the remaining mechanical locks onto the same key are each counted per cylinder and per key.
3Condition and fit of the door
A door that already closes true with standard holes is the simplest install. One that needs hinges shimmed, a strike pocket deepened or holes enlarged adds preparation time, and that work is quoted as its own line.
Smart Lock Installation: questions
Can the back door and garage door be put on the same system?
Yes, in one of two ways. Each door can get its own smart lock, all managed from the same app and account, with the same codes working at every door. Or, where the cylinders share a compatible keyway, the other doors can stay mechanical and be rekeyed so a single key operates them and the smart lock's override cylinder alike. Many households do the front door first and add the others later; the account and the codes carry across.
The house came with a smart lock. Can you make it mine?
Yes, and it is treated as a fresh installation rather than a hand-me-down. The lock is reset to factory settings using the maker's procedure, which wipes codes, schedules and paired phones, then enrolled to an account you create. Anything else that could open it, such as a hub or a voice assistant, gets its own check, because those permissions sit outside the lock. The override cylinder is rekeyed, batteries replaced and firmware updated. If the hardware is worn, replacing it is the cleaner choice.
I rent. Can I have a smart lock installed?
Yes, with your landlord's agreement first. Tenancy rules in this province expect a tenant to have the landlord's consent before changing a lock, and expect the landlord to have a working way in, so the sensible route is a short conversation and a note of what will be fitted. A retrofit model that mounts inside and keeps the existing exterior lock and key is often the easiest thing for a landlord to say yes to, since the door is unchanged from outside.
Change or Rekey Locks
- Deadbolt InstallationThe back door has a deadbolt in name only: a short bolt, a thin brass strike held by two little…
- Lock Replacement & UpgradeThe brass handleset has gone blotchy and green where the winter salt reaches it, and the coating on…
- Vintage Mortise Lock ServiceThe knob flops loose on its spindle and never springs back to level.
Smart Lock Installation near you
Below is the full menu of lock and key work available in Clarington, written for people who are not locksmiths. Each entry says what the service is, when it makes sense, and roughly how a visit unfolds, so you can arrive at the door already knowing what the technician is going to do and why.